Laying Treadmaster

This morning we completed the cutting of the Treadmaster. We had done this is three stages as it is quite hard on the hands, concentrated cutting. The Stanley knife has quite sharp edges along where you push the blade in and out. You don't notice this normally but cutting more than 30 pieces of Treadmaster you certainly do!

Then we went down to King Malu, washed and dried the deck thoroughly and started laying. This is only the second time we have laid Treadmaster, so we are still learning. However, this went better than the first time. We knew what to expect from the epoxy and worked quickly pasting and laying. We eventually laid 19 pieces, which means we are approximately two thirds through.  Tomorrow morning should see us complete.